Sanyo Denki drivers

Started by trev, October 11, 2024, 12:10:49 PM

Previous topic - Next topic

trev

I have some of these available, make me an offer. All came from working systems.

Mike

I have a small stock of the hybrids on the Sanyo drivers if anyone needs them - they seem to be pretty reliable though - I had one die a long timne ago, possibly due to shorted wiring.
 

kobie

Hi Mike.

Do you still have some of the drivers on hand, it can be the PMM5301 chips only and not the complete driver if you have some still left. I have just finished setting up all my components, ready to start building boards when my X-axis started to make a terrible sound. It sounds like something grinding in the turret and it also had jitter movements when moving. Turned off everything looking for the problem. I have spend the last hour looking for a loose or broken connection but could not find anything. Removing the X-Motor Driver plug points me to a driver phase failure issue.

Mike

Yes I still have a few of them - new old stock. Paypal me £20 each  inc. shipping to mike@whitewing.co.uk 
Probably worth trying swapping the  X and Y Drivers to confirm it's that, but check the wiring for shorts first.
I don't know what killed the one that died on me but not had any issues since.
 

Mike

BTW I did manage to do a temporary repair to my hybrid when it died  could be useful to get you going again
https://www.youtube.com/watch?v=DGqH8LGjZdY

kobie

Hi Mike.

Awesome work done with the repair, look like a brain surgery on the module.

I will Mail you to confirm detail for the spares as per your email provided.

Many thanks

Kobie
 

kobie

Hi Mike

I have just received the Module.
Many thanks
Kobie