Wanted : 14x14 TQFP tray

Started by Jason, November 20, 2017, 10:47:36 PM

Previous topic - Next topic

Jason

The muppets at Digikey sent me tape, cut into ~10cm lengths when I ordered in tray.
I'm going to call them tomorrow but the easiest might be to just get a tray and
transfer them as it's only 100pcs. So if anyone has a spare tray, I would be most
grateful. All costs covered+.
Farnell use to sell them for a couple of quid but they're out of 14x14.

Mike

I have plenty - let me have your address.

Jason


Gopher

Isn't that annoying when it happens?  RS are possibly the worst at it, we once used to have a SOT25 part from them that we used 400+ of at a time and they shipped them in bags of 1 from cut  tape, some fool had done that to their entire stock. In fact even now nigh on impossible to get a strip/reel of FT232 unless you buy them off FTDI directly.

While Mike seems to have you sorted if anyone ever needs 10x10 trays I always have lots, also empty reels and more limited numbers of  20x20 14x14 5x5 and 3x3 trays.

Jason

Mike, tray arrived today. Compensation shall be returned soon.

Thanks!