camera does not initialise properly on first boot

[trev]

Hi, most of the time when I load up RV Place the camera has some weird offset. A black band appears at the bottom. I believe this is related to the PC and wondering if it is a hardware or software issue. Maybe I installed the wrong camera driver? Has anyone experienced this issue?

I have attached an image showing the black band at the bottom. It does affect the position of placement.

Trev

[Mike]

May be the same issue I've observed, where you get fine horizontal stripe offsets, i.e. each alternate line has a fixed offset. I'm pretty sure this is to do with interlacing on the camera, the image grabber picking the wrong pair of fields to make a frame.
I've found that being consistent in the way you power up fixes it 100% - PC power on, then RV power on a few secs later.

[trev]

Thanks, will try your sequence and see if that solves it.