Author Topic: RV1s arm connections  (Read 1667 times)


  • Newbie
  • *
  • Posts: 4
    • View Profile
RV1s arm connections
« on: July 09, 2017, 09:45:21 PM »
I purchased an RV1s which i split to get it in the car and trailer.  I photographed and marked each connection, but i have missed the single circular connector on the underside of the arm inside the cabinet next to the motors.  There are 2 sockets it could connect into.  The outer socket nearest to the back panel looks cleaner than the inner one so i was tempted to plug it into that one but could someone please confirm that is correct?  Is there a manual showing connections?  The machine has not been used for about seven years. are there any components i should change before i switch on or is it a matter of suck it and see?


  • Administrator
  • Hero Member
  • *****
  • Posts: 581
    • View Profile
Re: RV1s arm connections
« Reply #1 on: July 13, 2017, 05:33:21 PM »
There have been a few variations over the years so hard to be definitive - not sure what connection you're referring to - maybe the camera ?
Worth checking the condition of the main belts in teh base, and that eveything moves freely but I don't think there is anything that will particularly break if not checked before firing up.
Most important thing to do first is to back up the calibration files on the PC.