Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - trev

#166
RV Hardware / Re: PCs for RVs
November 29, 2018, 11:21:06 AM
Much appreciated, thanks for putting this information together.

Trerv
#167
RV Hardware / Re: Converting 8mm feeders to 16mm or 24mm
November 06, 2018, 07:06:01 PM
Thanks for the thoughts.

I was thinking of taking a standard 2 - 3mm plate to attach all the mechanics too and then printing some runners for the top part to suit the tape. I had not even considered friction might be an issue. Maybe it depends on the material.

Static might also be introduced if using plastics I think. There seems to be some interesting printing materials though. Not recommending this one specifically but this type might be a good selection for runners.

https://www.amazon.co.uk/AMOLEN-Printer-Filament-Conductive-Filament-Black/dp/B07BDF75YC/ref=sr_1_1_sspa?ie=UTF8&qid=1541530820&sr=8-1-spons&keywords=conductive+pla&psc=1

Maybe a thin spray of lacquer would produce a nice smooth finish. The accuracy of the printers seems amazing. 0.1mm resolution and height can be as good as 0.05mm if required. I am looking at a Prusa i3 Mk3

I thought I might be able to print the tape spools for holding the waste tape as these will be a different size of the 16 and 24mm tapes.

I might be able to print some replacement arms and better holders for the reels as well.

Also I might print to magnetic blocks for positioning the boards.

Trev
#168
RV Hardware / Re: Converting 8mm feeders to 16mm or 24mm
November 03, 2018, 07:57:01 PM
Am thinking about trying to 3d print a new plate or several sections to make up a plate. I dont know how to use 3d cad and I dont have a printer but seems like a useful project to widen the skillset and maybe even invest in a printer.

I think the important thing about the plate is that it is level. Having several small plates would make this relatively easy to implement I think. I do not think it really has to be very strong and plastic does actually seem to print quite strong anyway.

What do people think?

Trev
#169
Stripped a feeder down and all looks pretty good. I think I just need to make a new top plate some how but I do not have the tools myself or the skills really. Am wondering how much it might cost to get someone to machine a new metal block for me to the correct profile. Suppose I would need to cad something up for someone to work to.

Looks promising though.
#170
Thats good to know, thanks.

Will strip one down and have a look.
#171
RV Hardware / Converting 8mm feeders to 16mm or 24mm
October 29, 2018, 05:24:41 PM
Has anyone tried converting 8mm feeders to 16 or 24mm? Need to open a unit up and investigate how much of a task this is but I have a few 8mm spare that need a service and was thinking it would be really useful to convert them instead as I have no 16mm or 24mm feeders.

Thanks

Trev
#172
I went to the site where the RV4s machines are. I managed to buy an oven and the machines were still there. They actually come with feeders which was not shown in the original pictures. The feeders all looked to be very clean and in good condition. They will not sell the feeders separately and will split the feeders evenly between the two machines. They said they had some offers but not really sure as they would have sold them I reckon. I think someone could offer 1k and get a machine with feeders.

Sorry I did not take pics. only thought about it afterwards.

Trev
#174
I was thinking the stencils might be expensive to get made for it and it takes up a lot of room. But it does look the business with the vision system to it
#175
What do people think of the paste printer they have for sale? Reckon it's a bit overkill for a few panels. More for proper production runs? Ironic that it's cheaper than manual paste screen printers.
#176
RV Hardware / Re: Fixed camera lighting upgrade
February 07, 2018, 07:31:58 PM
Have you made a programmable current driver for your boards? Looks very tidy.

I already bought leds Mike used but not gotten around to making the boards yet.

What camera is on your RV1S?
#177
RV Hardware / Re: Nozzle fabrication/ordering (Nov '17)
February 07, 2018, 12:58:39 PM
This looks to be great progress.
#178
General SMT / Re: Alternative hot air soldering method
January 23, 2018, 12:37:42 PM
I thought with Vapour phase the only problem would be how long the LEDs were kept at 230C? They might reach temperature before the metal PCB? I did not think they would go beyond it?



#179
General SMT / Re: Alternative hot air soldering method
January 22, 2018, 01:52:23 PM
Do you think vapour phase would be a good solution for this problem? Seems a lot of metal to heat up but you get assured 230C temperature with no chance of overshoot?

Trev
#180
General SMT / Re: Vapour phase reflow?
January 21, 2018, 11:31:43 PM
This is a better video...same person 

https://youtu.be/czwRntpEzgg