First and foremost, hi guys, I have been following for quite some time waiting to find a a versa that is at the right price, finally, one came along and I nabbed it for a reasonable price... A few things that needed fixing were the o rings for the nozzle were cracked and same for the nozzles themselves, so I changed them out; I also lapped the end of the none I ring nozzles, so they were coplanar with the "bed."
FYI
Presumably, I'm correct in saying from left to right on the furthest bank of tools are 1 through 5, respectively? Either way, these are the o ring sizes for the 3; I ring tipped nozzles
Tool three = 3mm ID 5mm OD x 1mm 70A
Tool four = 4mm ID 6mm OD x 1mm 70A
Tool five = 8mm ID 10mm OD x 1mm 70A
The latter size is the same for the tool change tip x2 required
We are working on an updated program to create files similar to mikes export tool we will upload once done... It will be for the output from easy eda, but kicad will be integrated as well in due course
Also, I have way too many 8mm feeders I'm after larger one's. Does anyone fancy a swap?
FYI
Presumably, I'm correct in saying from left to right on the furthest bank of tools are 1 through 5, respectively? Either way, these are the o ring sizes for the 3; I ring tipped nozzles
Tool three = 3mm ID 5mm OD x 1mm 70A
Tool four = 4mm ID 6mm OD x 1mm 70A
Tool five = 8mm ID 10mm OD x 1mm 70A
The latter size is the same for the tool change tip x2 required
We are working on an updated program to create files similar to mikes export tool we will upload once done... It will be for the output from easy eda, but kicad will be integrated as well in due course
Also, I have way too many 8mm feeders I'm after larger one's. Does anyone fancy a swap?