Print Page - Mekko CR350 - IR Reflow Oven

Title: Mekko CR350 - IR Reflow Oven
Post by: Gopher on February 21, 2011, 12:55:22 PM

Greetings,
we just aquired one of these beasts, it's a 5 zone, IR oven in need of a little TLC. It has a control PC with software installed, but no master disks to install it on another machine. Given that the pc seems to date from about 1996 (Win95, 16mbRAM 540mb hdd) this seems a little risky to rely on, so master disks would be handy.
Does anyone have copies of this software or any other info on this oven?
We already have its non-PC controlled 4 zone baby brother (CR300) so we have some info but more is always handy.
I think Mr Mekko was upgrading these to some extent to work better with Pb-free too does anyone know about that?

Thanks

Title: Re: Mekko CR350 - IR Reflow Oven
Post by: Gopher on March 07, 2011, 01:35:49 PM

Title: Re: Mekko CR350 - IR Reflow Oven
Post by: davidc on March 07, 2011, 06:28:00 PM

Talk to Martin at Mekko.. the heater are all repositioned so they work better for PB.. hes a helpful chap and likes to give software away for free too ... :P ;)

Mike's Forums

Versatronics RV series Pick & Place machines => General SMT => Topic started by: Gopher on February 21, 2011, 12:55:22 PM