Print Page - 3D printed PCB corner block

Title: 3D printed PCB corner block
Post by: Mike on June 18, 2023, 02:23:36 PM

3D printed PCB corner block.
Print the base and two of the screw STLs.
Screws are held in place with M3x16 screw, washer and spring ( approx 8 dia x 10mm long)
Takes two 10mm dia x 5mm high Neodumium magnets

Title: Re: 3D printed PCB corner block
Post by: Jason on July 26, 2023, 09:26:38 PM

If anyone has a dire need for these in aluminium let me know as I can CNC them.

Jason

Title: Re: 3D printed PCB corner block
Post by: Mike on July 28, 2023, 11:43:14 AM

Here's a straight version, for when the PCB is hanging over the edge of the base. Uses the retainer from the corner block .zip above

Title: Re: 3D printed PCB corner block
Post by: Mike on November 06, 2024, 06:29:05 PM

Here's a longer version of the corner for when the PCB is hanging over the left edge of the bed..

Mike's Forums

Versatronics RV series Pick & Place machines => RV Hardware => Topic started by: Mike on June 18, 2023, 02:23:36 PM