Print Page - Z axis rack and pinion source

Title: Z axis rack and pinion source
Post by: spiyda on March 09, 2018, 10:55:43 AM

Just being a bit lazy

does anyone have details for a source for the Z axis rack and pinion ( the metal version ) ?

Title: Re: Z axis rack and pinion source
Post by: Sixexe on March 09, 2018, 11:48:58 PM

I purchased mine from HPC Gears Limited part No. R0.4-190, it will need cutting to length (you should be able to get 2 out of this rack) and the fixing holes drilling. I also purchased Gears part No. G0.4-20 again a little machining is required to make these fit.

Title: Re: Z axis rack and pinion source
Post by: spiyda on March 10, 2018, 03:46:07 PM

Thanks,

I need a set for my second machine but no rush....
does anyone else want a set (as they come) while I am ordering ?

it works out about £21 + delivery and VAT per set

Mike's Forums

Versatronics RV series Pick & Place machines => RV Hardware => Topic started by: spiyda on March 09, 2018, 10:55:43 AM