Text only | Text with Images

Mike's Forums

Versatronics RV series Pick & Place machines => RV Software => Topic started by: spiyda on May 30, 2014, 09:40:57 PM

Title: Beginners question .. job file
Post by: spiyda on May 30, 2014, 09:40:57 PM
Rather a simple question, but I've been wracking my brains over this..

I've created a transfer file with the components all neatly placed, how now do I now create a new job ?
Title: Re: Beginners question .. job file
Post by: phonoplug on May 30, 2014, 09:48:21 PM
Assuming you have saved the transfer file from RVgerber, run RVsetup, open the transfer file, you then need to setup what feeders are being used for this job, and what parts are in what feeders. Once you've done that, you can output the job file.
Title: Re: Beginners question .. job file
Post by: Mike on May 30, 2014, 10:31:45 PM
I;ve put some software documentation Here (http://electricstuff.co.uk/forum/index.php?PHPSESSID=78be57e11012324071b0a745c1bb3c5d&topic=207.0)
Title: Re: Beginners question .. job file
Post by: spiyda on May 31, 2014, 11:59:02 AM
Simples...

thanks guys.. 

its the obvious stuff that catches me out!
Text only | Text with Images